Recent Articles
How to install the Thunder CO2 Galvo
Preface： When you receive your new Thunder CO2 Galvo machine, please refer to this section for the detailed installation procedures. Tool We Need M5 Allen Wrench *1 M8 Allen Wrench *1 Installation Procedure: 1. Machine Installation 1.1. Installation ...
AURORA 8 - Part of How to install laser source
Please see attached. Still need help? For specific technical questions or help requests, please open a Ticket with picture or video, so our Support team can assist you ASAP. For the information provided in the ticket, please refer to this link： Help ...
Air Pressure Sensor Setup Procedure
Air Pressure Detector Settings Yihd Airtac SMC Model WEW02-N-KHR DPSN1-10020 ISE20-N-M-L Lock&Unlock Press and hold the SET key and ∨ keys simultaneously to lock or unlock / Press and hold the SET key for 6 seconds, ignoring the SET interface at 2 ...
How to Install and Use the RDV Print Driver
Preface RDVPrint is a print driver software which help you using laser machine as a printer. You can draw anything in the software you like or are familiar with, such as CorelDRAW, Adobe Illustrator and Photoshop, even Microsoft Word, then"print" to ...
How to Properly Install the TITAN Laser Head to Avoid Scratching the Machine's Sheet Metal
Preface This article explains the correct installation direction of the TITAN laser head to prevent the machine's sheet metal from being scratched due to inertia during homing. Lens Tube Installation Guide: The correct laser head installation ...
Popular Articles
Lightburn Material Test for All CO2 Glass Tubes
Test with 3mm plywood, LightBurn software, Engraving(Fill) and Cutting(Line) modes , 60W, 80W, 100W, 130W tubes. Engraving(Fill) 60W 80W 100W 130W Cutting(Line) 60W 80W 100W 130W Material test file download The lbrn files are attached
Why does the cutting and engraving graphics reverse（mirror）
Reason: Improper setting of the software. Solution: In RDWorks: For old versions: Click “Config” – “system setting” on the menu bar. This dialog box will appears. Make sure “Axis X mirror” is unticked, and “Axis Y Mirror” is must ticked. For new ...
EzCad2 hatch/fill tutorial
The hatch function of laser marking machine is very important in practical applications, where to hatch, how to use, the meaning of hatch, how to set the hatch parameters. Here we take a look at the hatching tutorial. 1. Import the graphics we need ...
USB connection-RDWorks
1. Connect the laser machine and PC with the USB cable that came with the machine. 2. Install the software, please install the USB driver first before press "Install". 3. Open RDWorks and test the connection as following: 4. Then you can download the ...
How to import PDF files into RDWorks
1. RDWorks cannot read PDF and open it directly. 2. Use CorelDraw to open/import PDF file firstly. Then save the graphic as DXF file. Like below: 3. Then RDWorks can read the DXF file, Just import the DXF file into RDWorks directly. 4. The ...
KB