How to import PDF files into RDWorks
1. RDWorks cannot read PDF and open it directly.
2. Use CorelDraw to open/import PDF file firstly. Then save the graphic as DXF file.
Like below:
3. Then RDWorks can read the DXF file, Just import the DXF file into RDWorks directly.
4. The other way is open/import PDF file with CorelDraw，use the plugin button “Laser Running “ to import the graphic into RDWorks
End
Related Articles
RDWorks plug-in installation instructions
RDWorks plug-in installation instructionsFiles transfer failed when sending files
Problem description The laser software shows "File transfer failed" or "Communication Error" when we send the file to the machine. In LightBurn： In RDWorks： If always get a communication error but no other errors, it might be the machine and software ...Why does the graphic size that imported to RDWorks different from its original size
Reason: If the file being imported is DXF format, the problem maybe the original file and RDWorks have different units. For example, the unit of the original DXF file is “inch”, but in RDWorks, the DXF unit is set as “mm”. When you import the DXF ...USB connection-RDWorks
1. Connect the laser machine and PC with the USB cable that came with the machine. 2. Install the software, please install the USB driver first before press "Install". 3. Open RDWorks and test the connection as following: 4. Then you can download the ...Titan - How to import the Camera Calibration File into Lasermaker
Preface: This article covers how to import a calibration file for the Titan cameras into Lasermaker. You must have a valid license to use Cameras in Lasermaker, otherwise you will get a warning. If the calibration file was created in an older ...