General
How to identify the lens on Aurora Series
Preface: This article covers how to determine which lens you have installed on the Aurora Series Marking Number Look for the F-### on the lens. It should be either F-160, F-210 or F-290. Basic Specs for Each Lens Focal Distance Specs for Each Lens ...
Connecting an Aurora to EzCad/Lightburn
Read this first Driver is very important. Incorrect or uninstalled drivers can prevent the laser software from connecting to the machine. LightBurn and EzCad2 drivers cannot be installed on the same computer at the same time, only one of them can be ...
Focusing Instructions for the Aurora Series
Auora 8, UV, 8 Pro Series Quick Video Detail steps Place the object under the Auto Focus Red Light. Press the AF button, and the Galvo will automatically adjust. You'll hear a beep once the autofocus is complete. Aurora Lite Series Dual Red Light ...
How to Use the Pass-Through Door for Aurora Series
For longer objects, such as golf clubs, you can use the pass-through door for marking. You need to bypass the safety door when using the pass-through feature, allowing the machine to mark with the door open. In doing so, you accept all liability and ...
Aurora Series Tool Bag Included Parts
PS: Items in the toolbag may be different, article and video are just for reference. NO. Physical photos Descriptions Applications PS 1 Main Power Cord Power the machine 2 USB Cable Connecting the software and machine 3 U-Disk Storing relevant ...
AURORA's Param Configuration Information
Preface: This article is AURORA param configuration information. Please check these settings when needed. 1. EZCAD2 （1） Field （2） Laser control ①UV ②Fiber 20W ③Fiber 50W ④Mopa 20W/60W/100W （3）Port ①UV ②Fiber 20W/50W and Mopa 20W/60W/100W （4）Other （5） ...
Aurora Series: The Usual Suspects
Preface: The Usual Suspects are the things that are most commonly overlooked or incorrect, which can consume valuable time on issues that should already be checked and mastered. If you choose not to follow this guide, you will likely encounter ...
Lens Calibration for the Aurora Series
1. EzCad2 2. EzCad3 3. LightBurn Still need help? For specific technical questions or help requests, please open a Ticket with picture or video, so our Support team can assist you ASAP. For the information provided in the ticket, please refer to this ...
Aurora & Bolt Series Chuck Rotary
Chuck Rotary Dimensions Default Dip Switch Settings 1 ON (Steps bit 1) 2 OFF (Steps bit 2) 3 ON (Steps bit 3) 4 OFF (Steps bit 4) 5 OFF (CW\CWW) 6 OFF (Test Mode) Dip Switch Settings and Steps Table Default Steps Default Motor Steps is 4000. Due to ...
How to use Aurora do your first project
Video: Still need help? For specific technical questions or help requests, please open a Ticket with picture or video, so our Support team can assist you ASAP. For the information provided in the ticket, please refer to this link： Help Tech Support ...
Instruction Laser Source Manuals for AURORA Serial
Preface： Simple information about the laser source on the AURORA serial. UV AURORA 8 / 8 PRO AURORA Lite Laser Source 5W 20W Fiber 50W Fiber 20W Mopa 60W Mopa 100W Mopa 50W Fiber Specification Lark-355-5A RFL-P20QB RFL-P50QB YDFLP-E2-20-M7-S-R ...
Instruction Controller Manuals for AURORA Serial
Preface: Simple information about the Controller on the AURORA serial. AURORA 8 AURORA Lite AURORA 8 PRO UV Controller LMCV4-FIBFR-M DLC-M4-2D JCZ SZLI-B-LV4A AURORA 8 & AURORA Lite AURORA 8 and AURORA Lite Controller LMCV4-FIBER-M Instruction Manual ...
Instruction Galvanometer Manuals For AURORA Serial
Preface: Simple information about the Galvanometer on the AURORA serial. UV AURORA 8 AURORA 8 PRO AURORA Lite Galvanometer SINO-GALVO FEELTEK ZHIBO-TECH UV & AURORA 8 AURORA 8 and UV Galvanometer AF2206 Instruction Manual AURORA 8 PRO AURORA 8 PRO ...
Thunder Laser Aurora Autofocus Software
Preface: Aurora 8 V1.0 Aurora 8 Pro V1.0 Aurora 8 V2.0 Aurora 8 Pro V2.0 UV Aurora Lite Autofocus Software JhcSerial Tools TL-Tool Computer Specifications Windows 10/11 Windows 10/11 and MAC systems You can differentiate between Aurora 1.0 and 2.0 by ...
How to Set the Marking Order in EzCad
When we use the AURORA series for processing, we need to follow a processing order sequence. At this time we need to set the marking order of multiple objects, how to set the processing order of objects on EzCad, let's take a look at the following ...
EzCad2 common shortcut
Many users use the marking software is EzCad, but because sometimes there is not enough time to work, we have to use the software functions more quickly, which will have to use to shortcut. Ctrl+N is the new file shortcut for creating a new file. ...