Thunder Laser Aurora Autofocus Software

Preface:

	Aurora 8 V1.0	Aurora 8 Pro V1.0	Aurora 8 V2.0	Aurora 8 Pro V2.0	UV	Aurora Lite
Autofocus Software	JhcSerial Tools	TL-Tool
Computer Specifications	Windows 10/11	Windows 10/11 and MAC systems

You can differentiate between Aurora 1.0 and 2.0 by reading this article below.

Schematic of all machine iterations of the Thunder 

How to use the software：

1. jhcSerial Tools

Please refer to the following video at the 03:11.

2. TL tool

Please refer to the following video at the 03:13.

Where to find the software：

1. Open the U-disk that arrived with the machine> Auto Focus software>Software.

This procedure is only available for Windows systems. If you are using a Mac system, please refer point 2.

2. Please use the attached zip file.

Windows

Please check the attachment zip file.

Mac

Please check the attachment zip file.

Still need help?

For specific technical questions or help requests, please open a Ticket with picture or video, so our Support team can assist you ASAP. 

For the information provided in the ticket, please refer to this link：

Help Tech Support Troubleshoot Faster

End.

• Related Articles

• Manuals for Aurora software

  EzCad2 User's Manual Please see attached EzCad3 User's Manual Please see attached END

• Aurora Series User's Manual

  Aurora Series User's Manual Please see attached. The first manual is for machines manufactured before March 2024. The second manual is for machines manufactured after March 2024. How to check the machine's manufactured date: Equipment Info PS: ...

• Aurora Series V1&V2 Manual

  Please refer to the user manual. It contains everything you need to get your Aurora set up and running. Please see the manuals for both Aurora series V1 and Aurora series V2 attached bel

• Aurora Series: The Usual Suspects

  Preface: The Usual Suspects are the things that are most commonly overlooked or incorrect, which can consume valuable time on issues that should already be checked and mastered. If you choose not to follow this guide, you will likely encounter ...

• Calibrating Focus Length for the Aurora Series

  1. Set the Marking Object and Marking Parameters Draw a 10 x 10 mm square and set the parameters for the brightest beam during engraving. We use the laser software EzCad2 for the demo. Below are the recommended parameters for the Q-switch 50W laser ...