Parts & Replacement
Titan 51 Dual Laser Source Upgrade Installation Guide
Applicable model: Titan 51-80W with a single CO₂ laser source Upgrade configuration: CO₂ laser tube + fiber laser source (dual-source system) Fiber laser options: JPT 60 W or 100 W pulsed fiber laser (select one) 1. Upgrade Overview This upgrade adds ...
Titan Series Belts
Preface: This article covers Titan Series Belts for the Z, Y and Z axes. How to read a Belt Part Number: (Note that Length may be omitted when buying bulk or when searching for bulk length belt) Titan 27 and Titan Pro 27 Titan 35 and Titan Pro 35 ...
Replace the New Laser for TITAN
Preface This document describes the approved procedure for replacing the RF (CO₂) Laser Source and Fiber Laser Source on TITAN (PRO) Series machines and for verifying laser beam centering and beam alignment after replacement. Following these steps ...
How to Replace TITAN Series X and Y Drivers
Preface This article covers how to uninstall and reinstall a driver for the TITAN series machines. The information here can also be used to swap the X-axis and Y-axis drivers with each other for troubleshooting. The machine should be powered off and ...
Titan and Titan Pro Laser Heads (Standard/Optional Configurations and Replacement Overview)
Preface This article describes the standard and optional laser heads (lens tubes) available for the TITAN and TITAN Pro series machines. It also explains how focus settings differ between single-source and dual-source systems, and summarizes the ...
How to replace different laser heads in the TITAN series
Preface Selecting the appropriate lens is crucial for achieving optimal results in laser cutting and engraving. Different lens designs are tailored to specific applications, enhancing precision, efficiency, and compatibility with various materials. ...