Skill
Air Pressure Sensor Zero Calibration and Parameter Check
In this article, we will explain: ● Why the air pressure sensor may need to be re-zeroed periodically. ● When the air pressure sensor may need to be re-calibrated. ● How to reset and calibrate three different sensor models. 1. Why Is Zero Calibration ...
Machine Manuals Overview
Machine Manuals Overview Nova Nova Plus Thunder Bolt Aurora Aurora Lite Nova Nova Series User's Manual Nova Plus Nova Plus Series User's Manual Thunder Bolt Thunder Bolt Series User's Manual Aurora Aurora Series User's Manual Aurora Lite Aurora Lite ...
Preventative maintenance checklist
Proper care and routine maintenance of the machine will ensure optimal performance over a long service life. The following are all recommended maintenance items and cycles, the specific can be adjusted according to the actual use of the situation. ...
How to choose software after RDV controller update
RDWorks for different RDV controller Software Controller RDWorksV8.01.62 and latest version RDVision V2.00.18 RDV6442G-LY-B AND RDV6442G-LY-1G A software installation package is in U-disk that came with the machine. If you got the wrong package, ...
How to choose software after controller update
RDWorks for different controller Software Controller RDWorksV8.01.60 and older version RDC6442G-LY-B RDWorksV8.01.62 and latest version RDC6442G-LY-B AND RDC6442G-LY-1G A software installation package is in U-disk that came with the machine. If you ...
Lens Cleaning Recommendation
The machine may have particles left on the lens and mirrors after a long journey at sea, so be sure to clean the lens and mirrors before using it for the first time. Here is the instruction for clean NOVA series optic, ODIN is coming. ...
Common focus lens failure
While your optics can last years if properly maintained, it is a good idea to have a spare optics kit around just in case. 99% of all optic failures are due to not properly maintaining them and/or not having adequate air assist. It is vitally ...
The basics of focus
This data is specific to Thunder Laser Nova Series head assemblies but the principle applies to most chinese gantry CO2 lasers. Here is more on how the ThunderCAM plays well with autofocus to maintain correct calibration: NOTE: If you do not ...
How to prepare your files for feeding into the laser program to engrave
The laser machine can only burn into or through material. Also, the beam can only be made to follow straight or curved paths or to burn a grid of dots (a bitmap image). There is no way for the laser to represent color. 1. Scanned Image Engraving The ...
Introduction of parts in Tool box that comes with Thunder Laser Cutter
Introduction of parts in Tool box that come with Thunder Laser system Nova series 1.Focus ruler 2.Lens opener 3.Lens cleaner and clean cloth 4.6mm Nozzle 5.Magnets 6.Lubricating oil 7.X/Y Limit switch 8.Allen driver 9.Clamp 10.Sspare belt 11.Pocket ...