First Run
Connecting the AURORA to EzCad/Lightburn
Read this first The Thunder Galvo Series includes the AURORA Series and the Thunder CO₂ Galvo. Driver is very important. Incorrect or uninstalled drivers can prevent the laser software from connecting to the machine. LightBurn and EZCAD_LITE (EZCAD ...
Chuck Rotary Setup and Usage in Lightburn (AURORA)
Preface: This article will guide you to success with your Thunder Chuck Rotary. NOTE* There are a few style Chuck rotary available through Thunder Laser, Please check HERE to verify yours! If different your steps may vary. Chuck Rotary Setup in ...
Aurora Pro EzCad3 Roller Rotary Setup and Workflow for Tumbler Marking
Preface: This article covers a sample setup and workflow for a Tumbler on EzCad3 using a Roller Rotary on an Aurora Pro 20W Mopa Fiber Laser. This article assume you know the marking parameters(hatching, power, freq) etc for the tumbler you have. You ...