How to use the chuck rotary for Aurora Series

• Related Articles

• Aurora & Bolt Series Chuck Rotary

  Chuck Rotary Dimensions Default Dip Switch Settings 1 ON (Steps bit 1) 2 OFF (Steps bit 2) 3 ON (Steps bit 3) 4 OFF (Steps bit 4) 5 OFF (CW\CWW) 6 OFF (Test Mode) Dip Switch Settings and Steps Table Default Steps Default Motor Steps is 4000. Due to ...

• Aurora Series User's Manual

  Aurora Series User's Manual Please see attached. The first manual is for machines manufactured before March 2024. The second manual is for machines manufactured after March 2024. How to check the machine's manufactured date: Equipment Info PS: ...

• Aurora Series V1&V2 Manual

  Please refer to the user manual. It contains everything you need to get your Aurora set up and running. Please see the manuals for both Aurora series V1 and Aurora series V2 attached bel

• Aurora Series: The Usual Suspects

  Preface: The Usual Suspects are the things that are most commonly overlooked or incorrect, which can consume valuable time on issues that should already be checked and mastered. If you choose not to follow this guide, you will likely encounter ...

• Manuals for Aurora software

  EzCad2 User's Manual Please see attached EzCad3 User's Manual Please see attached END