General
Removing the Honeycomb Bed
The honeycomb bed can be easily removed for access to the blade system and for preventative maintenance. It's a good idea to familiarize yourself with the bed systems and inspect them prior to first use to ensure that these components are properly ...
Getting Nova Series Machines Through A Standard 30" Doorway
User Created Video: Thunder Video: The Users Guide section will walk you through 6 steps for learning how to disassemble your Nova Note: There’s glass laser tube inside the laser machine, be careful and do not collide with anything when moving. ...
NOVA Series Wiring Diagram TL Timer V8.4
Preface: These are drawings for the Nova series of machines as of February 2025. NOVA Version 2.0 NOVA Version 2.5/ Plus This article was last updated in February 2025 and will be updated with new content as it becomes available. End.
Focusing Instructions for the Nova Series
NOVA Version 2.0 Manual Focus Quick Video Detail Steps Place the object under the laser head. Locate the Focus Ruler in the toolbag, then place it on the object beneath the laser head. Press the Z button to move the honeycomb table to the correct ...
Focus Ruler
Physical photo： How to use it: The focus ruler is placed between the material and the laser head, which can moves back and forth slightly to prove that the focus is now correct. Related parameters Materials : 5mm wrought wood panels. File : Please ...
Fixed Platform Tools
Physical photo： How to use them: Related parameters Materials: 5mm wrought wood panels. File:Please see attached Parameters setting : please refer this picture which in NOVA51-130W. END