Fixed Platform Tools

Physical photo：

How to use them:

Related parameters
Materials: 5mm wrought wood panels.
File:Please see attached
Parameters setting : please refer this picture which in NOVA51-130W.

END

• Related Articles

• The ways to reduce laser cutting burn marks (anti-reflection)

  Preface： During the laser cutting process on a honeycomb platform, the laser beam strikes the honeycomb holes and is reflected onto the material surface. The reflected laser can leave burn marks on both sides of the cut seam, affecting the product's ...

• How to replace the Z-axis lead screw on the Thunder Bolt

  Tools needed： 1. Allen wrench set × 1 set 2. Steel ruler × 1 pcs 3. Lead screw × 1 pcs 4. Open-end wrench M5 * M8 × 1 pcs 5. Marker × 1 pcs 6. Positioning fixture × 1 pcs Note: A three-dimensional triangular wooden block is used to secure the lead ...

• Bolt Series Tool Bag Included Parts

  PS: Items in the toolbag may be different, the article and video are just for reference. NO. Physical photos Descriptions Applications PS 1 Main Power Cord Power the machine 2 Internet Cable Connecting the software and machine 3 PC Cable Connecting ...

• Camera Calibration for Thunder Bolt

  How to import Camera Correction File Every Thunder Bolt has a camera and also have a calibration file. Directly import the calibration file and the camera can be used. How to calibrate the camera Tools needed:A 3mm plywood of 400X300mm; Some magnets； ...

• Nova Plus Series User's Manual

  Please see attached: End.