Unboxing&Installation
How to Upgrade the PLC Firmware for Thunder Air
Preface This article describes the procedure to upgrade the PLC firmware of the Thunder Air fume extractor. Please strictly follow the steps below. Improper operation may result in upgrade failure. If you perform both HMI and PLC upgrades, power off ...
How to Upgrade the HMI Firmware for Thunder Air
Preface This article describes the procedure to upgrade the HMI firmware of the Thunder Air fume extractor. Please strictly follow the steps below. Improper operation may result in upgrade failure. Tools Required TPWorks software USB‑A to Type‑C data ...
How to Connect Thunder Air fume extractor to Laser Machine
Preface： As of June 2026, the Thunder Air 700 fume extractor supports linkage control with Thunder laser machines via a signal cable. The extractor can automatically start and stop together with the laser machine, with support for pre-start and ...