Schematic of all machine iterations of the Thunder

• Related Articles

• Thunder Laser Aurora Autofocus Software

  Preface: Aurora 8 V1.0 Aurora 8 Pro V1.0 Aurora 8 V2.0 Aurora 8 Pro V2.0 UV Aurora Lite Autofocus Software JhcSerial Tools TL-Tool Computer Specifications Windows 10/11 Windows 10/11 and MAC systems You can differentiate between Aurora 1.0 and 2.0 by ...

• Camera Calibration for Thunder Bolt

  How to import Camera Correction File Every Thunder Bolt has a camera and also have a calibration file. Directly import the calibration file and the camera can be used. How to calibrate the camera Tools needed:A 3mm plywood of 400X300mm; Some magnets； ...

• Fire Risk - Never leave your machine unattended

  We hear it all the time, don't run the laser unless you are monitoring it. This is from a client (VIDEO BELOW): PSA: I am guilty of reading about not leaving the laser unattended, but doing it anyway. An employee was cutting some acrylic and we are ...

• Thunder Bolt Series User's Manual

  Please see attached: END

• How to setup wireless network connection for Thunderlaser machine

  Here's what you'll need: A computer with wireless capability A wireless router An Ethernet cable A Thunder laser system Step: 1. router setup Use the Ethernet cable to connect the wireless router to the Ethernet port on your laser system. Connect the ...