Installation and Usage of CCD Camera

Installation and Usage of CCD Camera

Installation:


Usage:



Software：

Please download it from our official website. Downloads | THUNDER LASER

The unzip password is 123456.


Driver：

Please refer to this link article.How to install CCD camera driver manually

Still need help?

For specific technical questions or help requests, please open a Ticket with picture or video, so our Support team can assist you ASAP.

For the information provided in the ticket, please refer to this link：

Help Tech Support Troubleshoot Faster

End.


    • Related Articles

    • How to install CCD camera driver manually

      Problem: If the SV300 model has been selected during the installation of RDWorks and the installation of the driver has been completed, it is still not possible to connect to the CCD camera. Even when using the computer's own webcam, the presence of ...

    • ThunderCAM Installation - Lightburn camera

      NOTE: its a good idea to tape it up first and view it before you stick it down. The mounts are 3d printed and the adhesive is strong. Removal would likely break it. If you happen to get it upside down (many do) that's no big deal, just take out the ...

    • RDWorks plug-in installation instructions

      RDWorks plug-in installation instructions

    • Camera Calibration for Aurora 8

      This calibration method applies to AURORA 8 machines shipped before October 17, 2023, and to machines that have a large error in camera accuracy after importing the calibration file; For machines shipped after October 17, 2023, the camera has been ...

    • Camera Calibration for Thunder Bolt

      How to import Camera Correction File Every Thunder Bolt has a camera and also have a calibration file. Directly import the calibration file and the camera can be used. How to calibrate the camera Tools needed:A 3mm plywood of 400X300mm; Some magnets； ...