Air assist

Dual air assist system instructions for use
Thu, 10 Jun, 2021 at 9:09 PM
How to use an air compressor
Thu, 10 Jun, 2021 at 9:10 PM
Dual Air Assist Theory of operation and schematics
This is a typical installation of the dual stage air-assist in the Nova series machines. Your configuration may differ slightly. The maximum recommended...
Wed, 14 Jul, 2021 at 11:42 PM
Stock Nova series Air Assist ump
This stock air pump outputs about 5psi at 4.23 cfm. The cali air 8010 can output 90psi at 2.2cfm, for reference  The manual is attached b...
Wed, 14 Jul, 2021 at 11:44 PM
Retrofitting Dual Air Assist
for Thunder Laser Nova series machines with single air-assist. This is an advanced level installation. Here are all of the resources we have on this: Pl...
Thu, 10 Jun, 2021 at 9:23 PM
Selecting between low and high Dual Air Assist stages in LightBurn
Selecting Between Low and High Dual Air Assist Stages In LightBurn  If yours is working backwards please see this article: Thunder Laser Dual-Stage Air ...
Wed, 14 Jul, 2021 at 11:44 PM
Thunder Laser Dual-Stage Air Assist sequencing issues
Thunder Lasers with dual-stage air assist systems sometimes experience sequencing issues. This anomaly is predominately occurring when the laser is connecte...
Wed, 14 Jul, 2021 at 11:44 PM
Dual-stage Air Assist Sequencing issues
1. Problem description: The machines are equipped with dual air assist have an issue: Set High blow for job and run the job from software, the air assist ...
Mon, 11 Oct, 2021 at 11:29 PM