Introduction of parts in Tool box that come with Thunder Laser system Nova series



1.Focus ruler

2.Lens opener

3.Lens cleaner and clean cloth

4.6mm Nozzle

5.Magnets

6.Lubricating oil

7.X/Y Limit switch

8.Allen driver

9.Clamp

10.Sspare belt

11.Pocket knife

12.Reverse compensation setting

13.Acrylic

14.Spare laser power supply fuses

15.Ruler

16.Screwdriver

17.Cable ties

18.Usb and Ethernet cable


----------------------------------------------------------------------------------------------------------------

1.Focus ruler

Ensure correct focus between laser head and material (6mm).


2.Lens opener

Fixed ring for opening reflector and focusing lens.


3.Lens cleaner and clean cloth

Frequent cleaning of the lenses helps to extend the life of the lenses.


4.6mm Nozzle

Provides a soft blowing effect.


5.Magnets

We need to make sure that the material is flat enough or it may not be in focus.


6.Lubricating oil

Reduced friction between pulleys and guide rails.


7.X/Y Limit switch

Make the X/Y axis work within the specified range.


8.Allen driver

Adjusting the tightness of the belt and the fixed pulley.


9.Clamp

Used with the Allen driver to adjust the tightness of the fixed pulley.


10.Sspare belt

If the original belt is badly worn, it needs to be replaced.


11.Pocket knife

Cut the cable ties.


12.Reverse compensation setting

Parameters for optimizing machine engraving effects, ach machine’s parameters are unique.


13.Acrylic

Testing the power of the laser for proper functioning There will be instructions in the link here: 

https://www.thunderlaser.com/troubleshooting/maintenance/how-to-judge-if-the-laser-power-become-weaker.html


14.Spare laser power supply fuses

When the laser power fuse blows, replace it.


15.Ruler

16.Screwdriver

17.Cable ties

18.Usb and Ethernet cable


Connect with the machine.