Warranty requirements-Parts

Warranty requirements-Parts

Please follow our requirements strictly´╝ü

Please provide below information after thunder tech team confirming warranty!

1. Laser power supply

2. Laser tube

You can check the be link, which is about the warranty requirements of the laser tube.

Warranty Requirements-Laser tube

3. Controller board

4. LCD panel


You need to remove the LCD panel from machine, then you can see the label. 

5. Motor

6.Water chiller

    • Related Articles

    • Warranty Requirements-Laser tube

      Please follow our requirements strictly! Problem description Please describe your problem to us and provide a video or photo. That's can help us to judge the issue easily. Video or photo must show the problem clearly.  If you don't know how to ...
    • Introduction of parts in Tool box that comes with Thunder Laser Cutter

      Introduction of parts in Tool box that come with Thunder Laser system Nova series 1.Focus ruler 2.Lens opener 3.Lens cleaner and clean cloth 4.6mm Nozzle 5.Magnets 6.Lubricating oil 7.X/Y Limit switch 8.Allen driver 9.Clamp 10.Sspare belt 11.Pocket ...
    • Stock Nova series Air Assist pump

      This stock air pump outputs about 5psi at 4.23 cfm. The cali air 8010 can output 90psi at 2.2cfm, for reference  The manual is attached below
    • How to check if the slot switch is faulty

      If the L-shape shaft is bent after being hit, how to solve it? 1. Please loose the screw use M2 screwdriver, and make the L-shape switch to straight and install it back. 2. Then install it back.     3. Push the X/Y-axis by hand, observe whether the L ...
    • Dual Air Assist Theory of operation and schematics

      This is a typical installation of the dual stage air-assist in the Nova series machines. Your configuration may differ slightly. The maximum recommended operating system pressure, according to Thunder China Engineering, is now 40 psi to help prevent ...