Titan: Critical Spare Part Recommendations for Titan and Titan Pro

This article discusses spare parts needs for your Thunder Laser Titan and Titan PRO machines, verify all part numbers for your existing part. Parts can vary by install location.

If your laser is your business and down time is not acceptable while you wait on part deliveries, then the following are recommended:

For spare parts, be sure to check out the sales@thunderlaser.com

Titan Optics will not be the same as the Titan PRO optics in all locations due to the Fiber Source. Please pay attention when ordering.

Part	Notes
Titan Beam Combiner	1 Per Machine, in back near tube exit
Titan Mirrors 1,2 and 3	3 Per Machine
Titan Pro Mirror
Titan Pro Stock 3" Lens (Fiber and CO2)
Titan Stock 2.5" Lens	Other Lens are available like 4", 1.5", 2" and 2.5"
X and Y Servo
X and Y Motor Drivers	(Must be configured by the user for their specific to your driver/machine)
X and Y Endstop Switch	2 Locations per machine
Z Lower Limit Switch	1 Per Machine
Linear Bearing for X Axis 27 and 35
Linear Bearing for X Axis on 51
RF Laser Power Supply 60 Watt	1 Per machine, confirm your power supply size
RF Laser Power Supply 100 Watt	1 Per Machine, confirm your power supply size
Fiber Source Power Supply	1 Per Machine, confirm your power supply size
Titan Small X Belt