RDWorks-Scan offset testing

• Related Articles

• Lightburn-Scan offset testing

  You can download the file for adjust Scan Offset setting.

• Reverse compensation/Scan offset

  Before you use the laser machine.  Please remove the transparent bag from the front of honey comb plate. The transparent bag has a set of USB flash drive, and an engraving test sample. The USB flash drive stores software, manuals, libraries, etc… ...

• How to improve engraving quality in the scan mode of X-swing

  The engraving quality working on x_swing is generally worse than x_unilateralism, it usually results in ghosting effect or image offset or bi-directional engraving offset, like below. Notice : We generally use plywood or acrylic to test. x_swing ...

• USB connection-RDWorks

  1. Connect the laser machine and PC with the USB cable that came with the machine. 2. Install the software, please install the USB driver first before press "Install". 3. Open RDWorks and test the connection as following: 4. Then you can download the ...

• RDWorks plug-in installation instructions

  RDWorks plug-in installation instructions