RDWorks plug-in installation instructions

• Related Articles

• Installation instructions for Thunder Bolt

  End.

• Installation instructions for AURORA 8

  End.

• ThunderCAM Installation - Lightburn camera

  NOTE: its a good idea to tape it up first and view it before you stick it down. The mounts are 3d printed and the adhesive is strong. Removal would likely break it. If you happen to get it upside down (many do) that's no big deal, just take out the ...

• How to Use Roller Rotary on Your Machine

  Preface This guide provides step-by-step instructions for setting up and operating the roller rotary attachment, which is compatible with all Thunder Laser models. The configuration shown uses the Thunder Bolt as an example. It covers basic ...

• USB connection-RDWorks

  1. Connect the laser machine and PC with the USB cable that came with the machine. 2. Install the software, please install the USB driver first before press "Install". 3. Open RDWorks and test the connection as following: 4. Then you can download the ...