Preventative maintenance checklist

Preventative maintenance checklist

This article is for Nova series machines.


Proper care and routine maintenance of the machine will ensure optimal performance over a long service life.

DAILY CHECK LIST

☑ Focus lens

WEEKLY CHECK LIST

☑ Reflector

☑ Laser combiner

☑ Keep machine clean

MONTHLY CHECK LIST

☑ Rails and Screws

☑ Laser beam path

☑ Exhaust fan

☑ Water Chiller


● DAILY CHECK LIST

• Focus lens

1.Remove the laser head                2. Divide the laser head

                                           

3. Remove the focus lens with the tool      4. Clean the lens with lens cloth

                                           

Note: The direction of focus lens mounting please refer 

to below picture：


● WEEKLY CHECK LIST

• Reflector

Use a lens cloth and lens cleaner to keep all mirrors clean





• Laser beam combiner

Use a lens cloth and lens cleaner to keep combiner lens clean.




• Keep machine clean

Remove these small pieces that fall into the honeycomb table and collected in the machine using small brush or vacuum 

cleaner.



● MONTHLY CHECK LIST

• Rails and Screws

Add lubricant oil (or Rust Preventative Grease) to all rails on X&Y axis.



Add lubricant oil (or Rust Preventative Grease) to four Z axis screws


• Laser path

1. Mirror alignment;

When the laser head move to four corners of the working table, please check if the laser beam lasers to the same position on 

the third reflective mirror.


2. Vertical alignment;

When the laser head moves to four corners of the working table, please check if the laser beam can vertically go through

 the 10mm acrylic.


Please check laser beam path according to the video below.

• Exhaust fan

Clean the air intake


• Water chiller

Change the pure (distilled) water and clean the filters;

Note: if water drains slowly from drainage nozzle during water changing, please open the water supply 

inlet.


More detail please refer to the Chapter 5 Maintenance of User’s Manual.

Nova Series Unified User's Manual


    • Related Articles

    • Common focus lens failure

      While your optics can last years if properly maintained, it is a good idea to have a spare optics kit around just in case. 99% of all optic failures are due to not properly maintaining them and/or not having adequate air assist. It is vitally ...

    • Inspecting and cleaning Nova series optics

      Thanks to Robert Kofoed for the video! This article is for Nova series machines. Proper care and routine maintenance of the machine will ensure optimal performance over a long service life. It is imperative that you remove, inspect, and clean your ...

    • Thunder Bolt Series User's Manual

      Please see attached: END

    • Odin Series User's Manual

      Please see attached: END

    • Aurora Series User's Manual

      Aurora Series User's Manual Please see attached Manuals for Aurora software Please refer this link: Manuals for Aurora software END