Parameters for RF Laser Tube

Parameters for RF Laser Tube

Please see attached

​
END

    • Related Articles

    • Instruction Laser Source Manuals For Nova Series

      Preface: Simple information about the laser source on the NOVA series. NOVA Version 2.0/2.5 NOVA Plus Laser Source Glass Tube 40W Glass Tube 60W Glass Tube 80W Glass Tube 100W Glass Tube 130W RF Tube 60W Specification C45 C70 W2 C100 C130 ET-60 Brand ...

    • Parameters for CO2 Glass Laser Tube

      You also can check and download this PDF file in the attachment. END

    • Parameter for 120W RF Metal Laser Tube

      You can also check and download this PDF file in the attachment. Still need help? For specific technical questions or help requests, please open a Ticket with picture or video, so our Support team can assist you ASAP. For the information provided in ...

    • How to Replace the RF Tube

      Preface: This article describes only the procedure for replacing an RF tube. It does not include calibration. Quick Start Video: Complete Guide: The work performed should be done with the power off and the machine unplugged from the wall. Be sure to ...

    • The RF tube won’t fire the beam?

      Problem Description: The RF tube won't fire the beam even the laser switch is on. Reasons: 1. The temperature of RF tube is too high. If the temperature of RF tube is too high, RF tubes won't emit beam. Solution: Please off the machine and wait 4-5 ...