Parameters for CO2 Glass Laser Tube

Parameters for CO2 Glass Laser Tube

You also can check and download this PDF file in the attachment.




END



    • Related Articles

    • Parameters for RF Laser Tube

      Please see attached END

    • Why does the glass tube's power is unstable

      Problem description： The laser power is unstable in the same layer, which causes different depths of graphics in different positions in the same layer. Reasons： 1. The focus lens & reflector mirrors is dirty Dirty lenses reduce the laser reflectivity ...

    • Laser water coolants & additives

      Overview There has been much debate, experimentation, and documentation on the subject of water cooled lasers with regards to the main cooling fluid and additive combinations. The theoretical, as well as practical, implementations and observations ...

    • Why the laser tube won’t fire the beam

      Problem description: The laser tube won't fire the beam even the laser switch is on. Reasons: 1. The laser beam path is out of aligned If the laser beam path is out of aligned, the beam cannot comes out from laser head. Solution: Paste a piece of ...

    • Instruction Laser Source Manuals for AURORA Serial

      Preface： Simple information about the laser source on the AURORA serial. UV AURORA 8 / 8 PRO AURORA Lite Laser Source 5W 20W Fiber 50W Fiber 20W Mopa 60W Mopa 100W Mopa 50W Fiber Specification Lark-355-5A RFL-P20QB RFL-P50QB YDFLP-E2-20-M7-S-R ...