Parameter for Fiber Laser
You also can check and download this PDF file in the attachment.
Related Articles
Material Library for Fiber and CO2 Laser
Located below you will find our machines and their associated library. Click the link to download for your machine. Thunder CO2 glass tube parameter library Thunder CO2 RF tube parameter library Thunder Fiber laser tube parameter library Laser safe ...
Selection and Application of AURORA Series (Fiber, MOPA, UV)
Preface: Aurora series has 3 types of laser marking machines: Q-switched, MOPA, and UV. Q-switched laser and MOPA laser marking machines are fiber laser machines. Q-switched laser and MOPA laser marking machines' names are from the laser working ...
Instruction Laser Source Manuals for AURORA Serial
Preface: Simple information about the laser source on the AURORA serial. UV AURORA 8 / 8 PRO AURORA Lite Laser Source 5W 20W Fiber 50W Fiber 20W Mopa 60W Mopa 100W Mopa 50W Fiber Specification Lark-355-5A RFL-P20QB RFL-P50QB YDFLP-E2-20-M7-S-R ...
How to engrave on slate with a fiber laser
Speed:200mm/s Power:90% Frequency:20khz HATCH:2 pass HATCH type: Bidirectional Software used:LightBurn. Note: The engraving parameters are for reference only, and the engraving effect may vary due to the deepening of the lens, power laser source ...
How to engrave on 304 stainless steel with a fiber laser
Speed:200mm/s Power:60% Frequency:30khz HATCH:1 pass HATCH type: Bidirectional Software used:LightBurn. Angle:90° DPI:0.01 Note: The engraving parameters are for reference only, and the engraving effect may vary due to the deepening of the lens, ...