Odin/Bolt Laser head assembly diagram

• Related Articles

• Optional lenses for Thunder Bolt

  Preface： This article covers the difference between the Four Lens options for the Bolt series machines. Intro Video: Appearance of the four lenses: Engraving Test:The same picture was engraved with all four lens with the same power speed with the ...

• Odin Series User's Manual

  Please see attached: END

• Laser beam path adjustment for ODIN

  Tools Required: Slotted screwdriver Allen Wrench 1 piece of Masking Tape 1 safety goggles Warning Do not operate the laser with the side door open. Alignment will be performed with out risk of exposure to laser beam. Be careful please. The corners of ...

• How to Replace Controller for Thunder Bolt

  Preface: Switch off the machine and unplug it from the wall before starting replacement. Detailed steps: 1. How to save the parameters of the old controller If you can't communicate the old controller, you need a controller, please skip to STEP 2. a. ...

• Odin series checking lens assembly--old type

  A is the fixing nut for the lens assembly. B is the lens assembly: Here is how you can check that the lens is properly positioned and secure: ​ We have new design of lens assembly, the video is coming. End.