Lightburn-Scan offset testing

• Related Articles

• RDWorks-Scan offset testing

  You can download this file to test and adjust the Scan Offset settings.

• Reverse compensation/Scan offset

  Before you use the laser machine.  Please remove the transparent bag from the front of honey comb plate. The transparent bag has a set of USB flash drive, and an engraving test sample. The USB flash drive stores software, manuals, libraries, etc… ...

• How to improve engraving quality in the scan mode of X-swing

  The engraving quality working on x_swing is generally worse than x_unilateralism, it usually results in ghosting effect or image offset or bi-directional engraving offset, like below. Notice : We generally use plywood or acrylic to test. x_swing ...

• LightBurn Material Test

  Preface We recommend using LightBurn's material testing feature before engraving or cutting new materials to determine the optimal parameter. At the same time, we have tested some common materials and the following are the recommended parameters for ...

• Lightburn software download site

  Lightburn software download site:https://lightburnsoftware.com/