Lens Cleaning Recommendation
The machine may have particles left on the lens and mirrors after a long journey at sea, so be sure to clean the lens and mirrors before using it for the first time.
Here is the instruction for clean NOVA series optic, ODIN is coming.
Lens Clean Tool that Provide by Thunderlaser
We provide the Q-tips and lens cleaner, all come with the toolbox.
It is a common cleaning cleaner for glasses, you can buy some locally if run out of.
Lens cleaner recommendation
Anhydrous ethanol is a common cleaner in the optical parts industry and is easily volatile. Clean all optical parts with anhydrous alcohol is the best choice.
Thunderlaser do not suggest that clean the lens with isopropyl alcohol(IPA).
We got feedbacks that the coating of lens would be damaged by IPA.
Lens Tool
Swab
The lens would be scrached, if the quality of swabs is poor. So make sure get some swabs with good quality.
Link 1:
Related Articles
Inspecting and cleaning Nova series optics
Thanks to Robert Kofoed for the video! This article is for Nova series machines. Proper care and routine maintenance of the machine will ensure optimal performance over a long service life. It is imperative that you remove, inspect, and clean your ...Cleaning Thunder Bolt's exhaust fan
Qucikly Video: Specific steps: 1.Use a Phillips screwdriver to loosen both screws, but do not completely loosen the entire screw. 2.Push the hose clamp inward. 3.Then pull out the whole exhaust fan for cleaning. Since the power cord of the exhaust ...Understanding Thermal Lensing, Thermal Drift, and Heat Accumulation in Laser Marking Systems
Introduction Some users may notice that laser marking results become inconsistent during long production runs. Typical symptoms include: ● Marking gradually becoming lighter or darker ● Inconsistent engraving depth ● Loss of detail or sharpness ● ...Common focus lens failure
While your optics can last years if properly maintained, it is a good idea to have a spare optics kit around just in case. 99% of all optic failures are due to not properly maintaining them and/or not having adequate air assist. It is vitally ...Lens Change For Touch Panel
Preface: Firmware released in December 2025 for Titan added a function on the touch panel for users to select the Auto-Focus value for the optional lenses/barrels. If you need to upgrade to the new firmware, after the upgrade, please check and ...