Laser cutter's LCD panel in Chinese

Laser cutter's LCD panel in Chinese

If your laser cutter’s LCD panel is in Chinese, how to solve it?

1. click “Z/U” button

2. select “语言设置”and then press “Enter” to confirm

3. select “英文”and press “Enter” to confirm

Now it’s in English. 

Below video is for reference.


 

End.

    • Related Articles

    • Laser cutter has a wrong cutting/engraving size

      Reason: Wrong pulse setting of X/Y axis motors Solution: 1. Please draw a 100x100mm square using the cut mode and send to your laser cutter and cut the square. 2. Let’s say the actual size of the square measured is 98x95mm 3. In RDWorks, go File(F)>> ...

    • Alarm message of LCD panel-Frame X/Y Slop over

      Problem description: LCD panel shows the following information: Reason: 1.The size of the graphic is larger than the working area of the machine Solution： If your laser cutter's working area is 600×400mm, but you want to cut a graphic which larger ...

    • LCD panel keeps showing"Connecting to controller"

      Problem description: The LCD panel keeps showing "Connecting the controller" even if reboot the machine.  Reasons: 1. Controller board is faulty The controller board is faulty.  Solution: Turning the machine on, open the right side door and see if ...

    • Alarm message of LCD panel--Machine protected（Old type sensor)

      Question: LCD panel shows the following information: Reasons: 1. The doors with sensor are not closed Our machine has protection sensors for door (front cover and laser tube cover), like below. Solution: Please close all the doors before starting ...

    • Alarm message of LCD panel-No enough extend space

      Problem description: LCD panel shows the following information: Reason: 1.This problem only appears on engraving mode, it's caused by the buffer distance is out of bound.  For example, if you want to engrave a picture of 200×200mm, you move the laser ...