Installation instructions for Thunder Bolt
End.
Related Articles
Thunder Bolt Series User's Manual
Please see attached: ENDRDWorks plug-in installation instructions
RDWorks plug-in installation instructionsHow to Replace Controller for Thunder Bolt
Preface: Switch off the machine and unplug it from the wall before starting replacement. Detailed steps: 1. How to save the parameters of the old controller If you can't communicate the old controller, you need a controller, please skip to STEP 2. a. ...The Circuit Diagram of the Thunder Bolt
Here's the circuit drawing for the Thunder bolt. Please check attached file. End.Camera Calibration for Thunder Bolt
How to import Camera Correction File Every Thunder Bolt has a camera and also have a calibration file. Directly import the calibration file and the camera can be used. How to calibrate the camera Tools needed:A 3mm plywood of 400X300mm; Some magnets； ...