Related Articles
How to use EZCAD Code Bar
Connecting an Aurora to EzCad/Lightburn
Read this first Driver is very important. Incorrect or uninstalled drivers can prevent the laser software from connecting to the machine. LightBurn and EzCad2 drivers cannot be installed on the same computer at the same time, only one of them can be ...
How to Set the Marking Order in EzCad
When we use the AURORA series for processing, we need to follow a processing order sequence. At this time we need to set the marking order of multiple objects, how to set the processing order of objects on EzCad, let's take a look at the following ...
How to use EzCad2 to mark bitmap
Many of our users choose to mark bitmap on materials for a more aesthetically pleasing product when using a fibre laser. However, the results are often unsatisfactory during operation, or they do not know how to process a bitmap with EZcad. Follow ...
How to Use the Pass-Through Door for Aurora Series
For longer objects, such as golf clubs, you can use the pass-through door for marking. You need to bypass the safety door when using the pass-through feature, allowing the machine to mark with the door open. In doing so, you accept all liability and ...