Y-axis belt replacement and adjustment(Take the right side of the Y axis belt as an example) Tools needed M3 Screwdriver Plier 5.5mm wrench New belt A pair of scissors Masking tape Disassemble Turn off the machine and unplug the power cord. Remove ...
Firstly, disconnect the machine from its power source Disassembly procedure: Toole needed: M3/M4/M5 Allen Wrench Tips: Loosen in anticlockwise, tighten in clockwise. 1. Loosen two upper screws on the buckle then take out the belt; 2. Unscrew and ...
Preface This document describes the approved procedure for replacing the RF (CO₂) Laser Source and Fiber Laser Source on TITAN (PRO) Series machines and for verifying laser beam centering and beam alignment after replacement. Following these steps ...
How to judge if the pre-filter need to be replace When the numbers of digital screen>50%, the yellow light will turns on. It shows that the extraction power not strong, the filter cloth and the pre-filter need to be replaced. Replace instruction 1. ...
Preface To complete the replacement more accurately, please quickly review this video before starting the replacement. Detailed Replacement Guide Start by powering off the machine and unplugging it from the wall power. Guide Video: How to Replace the ...