How to Replace Laser Heads and Nozzle in the NOVA PRO Series

How to Replace Laser Heads and Nozzle in the NOVA PRO Series

Preface

This guide shows the procedure for replacing the laser head and nozzle on the NOVA PRO series. Before starting the replacement, please review the different types of laser heads and nozzles available for this model so you can confirm you are using the correct spare part.  

Laser Head & Nozzle Types

Laser Head

The NOVA PRO series supports four lens options: 1.5", 2", 2.5", and 4". The 2.5" lens with lens barrel is included as standard, while the other three lenses(and their barrels) are available as optional accessories and can be purchased separately.

Lens

Application

1.5''

Suitable for fine engraving and cutting of very thin materials.

2''

Suitable for general-purpose engraving and cutting

2.5''

Suitable for general-purpose engraving and cutting.

4''

Suitable for engraving and cutting thicker materials, particularly over 10 mm thickness.

Nozzle

The NOVA PRO Series supports two nozzle sizes: 3 mm (standard configuration) and 6 mm (spare nozzle supplied in the toolbox).


Quick Video



Still need help?

For specific technical questions or help requests, please open a Ticket with picture or video, so our Support team can assist you ASAP.

For the information provided in the ticket, please refer to this link:

Help Tech Support Troubleshoot Faster


End.