How to adjust the honeycomb table to level Open the front door and remove the drawer. These four screws are used to secure the table holder. Unlock the set screws. During the adjustment process, it is necessary to observe the change in height and to ...
Preface: This article is basically a copy paste of the attached PDF that covers how to replace the Z axis belt on your Nova series laser. It is currently a work in progress. This work should be performed with the machine powered off and unplugged. ...
1. Two sides of the working table are not of the same height Turn off the whole machine power, manually pull one of the belts of Z axis so as to adjust the up and down of the working table height of this side and calibrate the level in this way. ...