The issue usually occurs on AURORA 8 PRO(50QB).If you have the same problem with other AURORA models, please contact us:tech@thunderlaser.com Problem describe Ezcad 3 show error" Power alarm" Reasons: 1. Unstable voltage with laser source Solution: ...
Problem description: The laser power is unstable in the same layer, which causes different depths of graphics in different positions in the same layer. Reasons: 1. The focus lens & reflector mirrors is dirty Dirty lenses reduce the laser reflectivity ...
Overview There has been much debate, experimentation, and documentation on the subject of water cooled lasers with regards to the main cooling fluid and additive combinations. The theoretical, as well as practical, implementations and observations ...
Introduction of parts in Tool box that come with Thunder Laser system Nova series 1.Focus ruler 2.Lens opener 3.Lens cleaner and clean cloth 4.6mm Nozzle 5.Magnets 6.Lubricating oil 7.X/Y Limit switch 8.Allen driver 9.Clamp 10.Sspare belt 11.Pocket ...