How to install driver for Ezcad3

How to install driver for Ezcad3

Installation steps:

The dongle must be plugged into the computer during the installation process.


1. Connect your fiber laser with PC through USB cable.


2. Open manage on your computer.


3. Find the devices (DLC10000) with exclamation marks in device manger>>others devices.


4. Update the driver.


5. Browse my computer for driver software.


6. Select the correct driver file.


You can find the driver file under this path:
U-disk came with the machine >> AURORA Series - Fiber Laser >> Aurora 8 PRO >> Fiber software >> Driver

7. Successful update.


If the above installation steps do not complete the installation, please contact us : tech@thunderlaser.com 

End.

    • Related Articles

    • Connecting an Aurora to EzCad/Lightburn

      Read this first Driver is very important. Incorrect or uninstalled drivers can prevent the laser software from connecting to the machine. LightBurn and EzCad2 drivers cannot be installed on the same computer at the same time, only one of them can be ...

    • How to install CCD camera driver manually

      Problem: If the SV300 model has been selected during the installation of RDWorks and the installation of the driver has been completed, it is still not possible to connect to the CCD camera. Even when using the computer's own webcam, the presence of ...

    • How to Choose the Correct Driver for Ezcad2

      Problem description When the following problems are encountered during the installation of the driver 1. The error message appears: "Windows has found drivers for the device, but encountered an error while trying to install them." 2. If the driver is ...

    • How to Replace Thunder Bolt or Odin's X and Y driver

      Preface: This article covers how to uninstall and install a driver for the Bolt and Odin series machines. The information here can also be used to swap the X and Y driver with each other for troubleshooting. Quickstart Video: Complete Guide This ...

    • How to Set the Marking Order in EzCad

      When we use the AURORA series for processing, we need to follow a processing order sequence. At this time we need to set the marking order of multiple objects, how to set the processing order of objects on EzCad, let's take a look at the following ...