How to install and calibrate the lightburn camera

How to install and calibrate the lightburn camera

    • Related Articles

    • ThunderCAM Installation - Lightburn camera

      NOTE: its a good idea to tape it up first and view it before you stick it down. The mounts are 3d printed and the adhesive is strong. Removal would likely break it. If you happen to get it upside down (many do) that's no big deal, just take out the ...
    • Camera Calibration for Thunder Bolt

      How to import Camera Correction File Every Thunder Bolt has a camera and also have a calibration file. Directly import the calibration file and the camera can be used. How to calibrate the camera Tools needed:A 3mm plywood of 400X300mm; Some magnets; ...
    • Camera Calibration for Aurora 8

      This calibration method applies to AURORA 8 machines shipped before October 17, 2023, and to machines that have a large error in camera accuracy after importing the calibration file; For machines shipped after October 17, 2023, the camera has been ...
    • How to install CCD camera driver manually

      Problem: If the SV300 model has been selected during the installation of RDWorks and the installation of the driver has been completed, it is still not possible to connect to the CCD camera. Even when using the computer's own webcam, the presence of ...
    • ThunderCAMs vs.LightBurn&Other USB Webcams

      There is a lot of information (and misinformation) floating around about LightBurn's camera feature as they relate to Thunder Laser machines. There are also a lot of questions about what camera works with what laser. We are going to aggregate the ...