How to choose software after controller update
RDWorks for different controller
| Software | Controller |
| RDWorksV8.01.60 and older version | RDC6442G-LY-B |
| RDWorksV8.01.62 and latest version | RDC6442G-LY-B AND RDC6442G-LY-1G |
A software installation package is in U-disk that came with the machine. If you got the wrong package, contact us :tech@thunderlaser.com
Where the U-disk is :
Where to installation package in U-disk :
About when we started to update this, more info here: Oct-2022-controller-memory-upgrade-to-1g
Where the controller is
Open the lower right door with the black key first.
The left one is controller, a label on it.
Confirming the RDWorks Version
Check the name of installation package
Or in RDWorks, Help >> About RDCAM
Related Articles
How to choose software after RDV controller update
RDWorks for different RDV controller Software Controller RDWorksV8.01.62 and latest version RDVision V2.00.18 RDV6442G-LY-B AND RDV6442G-LY-1G A software installation package is in U-disk that came with the machine. If you got the wrong package, ...Manuals for LaserMaker Software
LaserMaker User's Manual Please see attached ENDHow to Choose the Correct Driver for Ezcad2
Problem description When the following problems are encountered during the installation of the driver 1. The error message appears: "Windows has found drivers for the device, but encountered an error while trying to install them." 2. If the driver is ...Touch Panel's controller and HMI firmware upgrade method
Firmware Method File Name HMI By Panel update-20231014.hmt Controller By Panel or RDWorks RDC6442G-1G-LY-V7.07.02.20231012.6.upd NOTE:To update the required firmware files, please contact us: tech@thunderlaser.com. The HMI firmware must be updated ...Manuals for Aurora software
EzCad2 User's Manual Please see attached EzCad3 User's Manual Please see attached END