How to Adjust Thunder Bolt's the Laser Beam Path

How to Adjust Thunder Bolt's the Laser Beam Path

Quickstart video：



Still need help?


For specific technical questions or help requests, please open a Ticket with a picture or video, so our Support team can assist you ASAP.

For the information provided in the ticket, please refer to this link：

Help Tech Support Troubleshoot Faster


End.


    • Related Articles

    • Laser beam path adjustment for ODIN

      Tools Required: Slotted screwdriver Allen Wrench 1 piece of Masking Tape 1 safety goggles Warning Do not operate the laser with the side door open. Alignment will be performed with out risk of exposure to laser beam. Be careful please. The corners of ...

    • Thunder Bolt Series User's Manual

      Please see attached: END

    • Aligning Your Laser Beam

      Preface: This article covers How To align your laser beam in a 3 mirror gantry based Nova laser Keys to Success: (Read all of these) 1. Make sure the gantry is mechanically aligned else you will have trouble with mirror 3 Nova X and Y Verticality ...

    • How to adjust the laser beam path

    • How to Replace Controller for Thunder Bolt

      Preface: Switch off the machine and unplug it from the wall before starting replacement. Detailed steps: 1. How to save the parameters of the old controller If you can't communicate the old controller, you need a controller, please skip to STEP 2. a. ...