How do i change the language of Thunder Bolt HMI if it is Chinese

How do i change the language of Thunder Bolt HMI if it is Chinese



    • Related Articles

    • Thunder Bolt Series User's Manual

      Please see attached: END

    • Level the honeycomb table on Thunder Bolt

      How to adjust the honeycomb table to level Open the front door and remove the drawer. These four screws are used to secure the table holder. Unlock the set screws. During the adjustment process, it is necessary to observe the change in height and to ...

    • Camera Calibration for Thunder Bolt

      How to import Camera Correction File Every Thunder Bolt has a camera and also have a calibration file. Directly import the calibration file and the camera can be used. How to calibrate the camera Tools needed:A 3mm plywood of 400X300mm; Some magnets； ...

    • Bolt Single Blowing Channel Description

      Preface:1.Since Thunder Bolt doesn't have a dual air assist, there is no high volume air or low volume air, only the difference of whether or not it uses air assist. 2.When using the blowing air, the volume air can be adjusted by twisting this screw. ...

    • Cleaning Thunder Bolt's exhaust fan

      Qucikly Video: Specific steps: 1.Use a Phillips screwdriver to loosen both screws, but do not completely loosen the entire screw. 2.Push the hose clamp inward. 3.Then pull out the whole exhaust fan for cleaning. Since the power cord of the exhaust ...