for Thunder Laser Nova series machines with single air-assist. This is an advanced level installation. Here are all of the resources we have on this: Please see attachment Additional resources: Dual Air Assist Theory of Operation and Schematics How ...
This is a typical installation of the dual stage air-assist in the Nova series machines. Your configuration may differ slightly. The maximum recommended operating system pressure, according to Thunder China Engineering, is now 40 psi to help prevent ...
Thunder Lasers with dual-stage air assist systems sometimes experience sequencing issues. This anomaly is predominately occurring when the laser is connected to the PC via USB. If you toggle air assist ON in LightBurn the high volume stage should ...
1. Problem description: The machines are equipped with dual air assist have an issue: Set High blow for job and run the job from software, the air assist on the machine is Low assist channel on. But if you run it from machine, it's normal. 2. ...
Selecting Between Low and High Dual Air Assist Stages In LightBurn If yours is working backwards please see this article: Thunder Laser Dual-Stage Air Assist Sequencing Issues