Critical Spare Part Recommendations for NOVA and Nova Plus series machines

Critical Spare Part Recommendations for NOVA and Nova Plus series machines

Info
This article discusses spare parts needs for your Thunder Laser Nova and Nova Plus machine series, verify all part numbers for your existing part.




If your laser is your business and down time is not acceptable while you wait on part deliveries, then the following are recommended:

For spare parts, be sure to check out the sales@thunderlaser.com


Part
Notes
Nova 24 Beam Combiner
1 Per Machine, in back near tube exit
Nova 35,51, 63 Beam Combiner
1 Per Machine, in back near tube exit
Nova Series Mirrors
3 Per machine
Nova Series Stock 2" Lens
Other Lens are available like 4" and HR Top and Bottom
Nova Plus Stock 2.5" Lens

Glass Tube Laser Power Supply
Pick the LPSU Wattage based off your specific machine
X and Y Motor

X and Y Motor Drivers
Pick the motor driver that matches your existing
X and Y Endstop Switch
2 Locations per machine
Z Lower Limit Switch
(Nova 1, Nova Plus 2 per machine)
Auto-Focus Sensor
For Nova Plus Only
Roller Bearings
16 Per Machine
Glass Laser Tube
Pick the appropriate Tube based off your machine. Only recommend if tube is near End of Life
RF Laser Tube
Not recommended to have a spare.
RF Laser Power Supply 60 Watt
1 Per machine, confirm your power supply size
RF Laser Power Supply 80 Watt
1 Per Machine, confirm your power supply size