Cleaning your stock exhaust fan

Cleaning your stock exhaust fan

This is what can build up in your exhaust system, especially the fan, and can cause critical failure so its important to regularly maintain your exhaust system.




Here is how to clean the HF-150 Inline Fan that ships with the Mini 60 and Nova 24:




Here is more on that fan: HF-150 Inline Exhaust Fan Specs



Here is how to clean the CZ-TD550 Centrifugal Fan that ships with the Nova 35, 51, and 63:




Here is more on that fan: CZ-TD550 Exhaust Fan Specs


    • Related Articles

    • Cleaning Thunder Bolt's exhaust fan

      Qucikly Video: Specific steps: 1.Use a Phillips screwdriver to loosen both screws, but do not completely loosen the entire screw. 2.Push the hose clamp inward. 3.Then pull out the whole exhaust fan for cleaning. Since the power cord of the exhaust ...

    • Exhaust fan cannot extract smoke or dust

      Reasons:   1. Exhaust fan break down Solution: there’s a common way to connect it to the power directly using the power cable of chiller, then check if exhaust fan can be turn on normally. See below.    2. Connect the fan inlet and outlet in opposite ...

    • Inspecting and cleaning Nova series optics

      Thanks to Robert Kofoed for the video! This article is for Nova series machines. Proper care and routine maintenance of the machine will ensure optimal performance over a long service life. It is imperative that you remove, inspect, and clean your ...

    • Stock Nova series Air Assist pump

      This stock air pump outputs about 5psi at 4.23 cfm. The cali air 8010 can output 90psi at 2.2cfm, for reference  The manual is attached below

    • Lens Cleaning Recommendation

      The machine may have particles left on the lens and mirrors after a long journey at sea, so be sure to clean the lens and mirrors before using it for the first time. Here is the instruction for clean NOVA series optic, ODIN is coming. ...