Popular Articles
Lightburn Material Test for All CO2 Glass Tubes
Test with 3mm plywood, LightBurn software, Engraving(Fill) and Cutting(Line) modes , 60W, 80W, 100W, 130W tubes. Engraving(Fill) 60W 80W 100W 130W Cutting(Line) 60W 80W 100W 130W Material test file download The lbrn files are attached
Why does the cutting and engraving graphics reverse（mirror）
Reason: Improper setting of the software. Solution: In RDWorks: For old versions: Click “Config” – “system setting” on the menu bar. This dialog box will appears. Make sure “Axis X mirror” is unticked, and “Axis Y Mirror” is must ticked. For new ...
USB connection-RDWorks
1. Connect the laser machine and PC with the USB cable that came with the machine. 2. Install the software, please install the USB driver first before press "Install". 3. Open RDWorks and test the connection as following: 4. Then you can download the ...
Why USB connection is not working-RDWorks
Reasons: 1. USB cable is loose or faulty Solution: Unplug the USB cable and plug it back, try again. If re-plug the cable, problem still exists. 2. USB driver is not install successfully Before you install the software, please install the USB driver ...
How to import PDF files into RDWorks
1. RDWorks cannot read PDF and open it directly. 2. Use CorelDraw to open/import PDF file firstly. Then save the graphic as DXF file. Like below: 3. Then RDWorks can read the DXF file, Just import the DXF file into RDWorks directly. 4. The ...