Popular Articles
Lightburn Material Test for All CO2 Glass Tubes
Test with 3mm plywood, LightBurn software, Engraving(Fill) and Cutting(Line) modes , 60W, 80W, 100W, 130W tubes. Engraving(Fill) 60W 80W 100W 130W Cutting(Line) 60W 80W 100W 130W Material test file download The lbrn files are attached
Why does the cutting and engraving graphics reverse（mirror）
Reason: Improper setting of the software. Solution: In RDWorks: For old versions: Click “Config” – “system setting” on the menu bar. This dialog box will appears. Make sure “Axis X mirror” is unticked, and “Axis Y Mirror” is must ticked. For new ...
Why USB connection is not working-RDWorks
Reasons: 1. USB cable is loose or faulty Solution: Unplug the USB cable and plug it back, try again. If re-plug the cable, problem still exists. 2. USB driver is not install successfully Before you install the software, please install the USB driver ...
How to setup my Nova laser cutter
Introduction of parts in Tool box that comes with Thunder Laser Cutter
Introduction of parts in Tool box that come with Thunder Laser system Nova series 1.Focus ruler 2.Lens opener 3.Lens cleaner and clean cloth 4.6mm Nozzle 5.Magnets 6.Lubricating oil 7.X/Y Limit switch 8.Allen driver 9.Clamp 10.Sspare belt 11.Pocket ...